Blog: read our articles

Reduce inventory levels: Free up working capital | Inact

Written by Anders Hesdam | 19. November 2026

Finance wants to reduce inventory levels by 15% before year end. Purchasing knows there are items that should have gone long ago. But nobody can say exactly which ones, and nobody wants to be the person who cuts the item customers are waiting for.

When you set out to reduce inventory, the first question is not how much you can cut. It is why each part of your inventory is there. Inventory that exists because a supplier only sells in batches of 2,400 units needs a completely different lever from inventory that exists because nobody stopped buying an item that no longer sells.

This article gives you a simple way to split your inventory, a worked example of what each lever frees up and what it costs, and a realistic view of what you can expect.

Why do you have too much inventory?

Tied-up capital in inventory is the money sitting in goods on the shelf until they are sold or used. Some of it is built up on purpose, for example before a season. But unnecessary inventory often builds up through a series of small decisions.

Purchasing takes a bigger order to get a volume discount. Sales asks for extra of an item because a large customer might order. Safety stock was set high when the supplier was unreliable, and nobody has touched it since. A new variant joins the range and the old one is never phased out. Each decision makes sense on the day.

You only see the total on the balance sheet. That is where inventory and cash flow become the same conversation: Every euro in inventory is a euro you do not have in the bank for wages, investment or debt repayment. On top of that come the holding costs: interest, space, handling, shrinkage and the risk that the item ends up as obsolete inventory.

Split your inventory by why it exists

Do not split your inventory by location or product group. Split it by cause. For each item, you can divide your inventory into four categories:

  • Cycle stock. Inventory that exists because you buy in batches rather than one unit at a time. With steady demand and full deliveries, you hold half an order on average. Batch size is driven by order quantity, volume discounts and the supplier's minimum order quantity.
    The solution is to order smaller quantities more frequently.

  • Safety stock. The buffer against swings in demand and lead time. Its size depends on how much the two vary and which service level you want.
    The solution is to recalculate on current data and give items different service levels. Our guide to safety stock calculation shows how.

  • Excess inventory. Anything above what cycle stock and safety stock can explain. It can come from a forecast that was too high, an order that arrived too early or a campaign that did not sell.
    The solution is to delay or stop purchasing until the level comes down. Read more about excess inventory.

  • Items with no movement. Items that have not been sold or used for a long time, with no sign that they will be.
    The solution is to sell them off, return them to the supplier or scrap them, and to decide whether the item should stay in the range at all. That is an assortment management decision, not just an inventory one.

The split changes the conversation. "Inventory must be reduced by 15%" becomes four specific questions that belong in different places.

  • Batch sizes are a negotiation with the supplier.
  • Safety stock is a planning parameter.
  • Items with no movement are an assortment decision that sales and product owners need to be part of.
  • Excess inventory calls for a review of demand, purchasing plans and existing stock.

You do not need to start with the whole range. Start with the items that tie up the most capital.

Worked example: how to reduce inventory levels on one item

This is a hypothetical example, with figures you can check for yourself.

An item costs €35 per unit. Demand is steady at 400 units a month, or 4,800 units a year. The supplier has a minimum order quantity of 2,400 units, so you order twice a year. Safety stock in the ERP is set at 300 units.

Based on those figures, your average inventory should be 2,400 / 2 + 300 = 1,500 units. The rule of thumb average inventory = half the order quantity + safety stock assumes steady demand and full deliveries, so treat it as a guide, not a precise answer. Actual average inventory over the past year was 1,900 units, or €66,500.

Part of inventory Change Capital freed Ongoing cost
Possible excess inventory Up to 400 units → 0 Up to €14,000 None, if the surplus is confirmed
Safety stock 300 → 200 units €3,500 None, if the calculation holds
Cycle stock 1,200 → 600 units approx. €20,580 approx. €3,360 more in purchasing per year


The 400 units
are the difference between actual and calculated average inventory. That does not necessarily mean you have 400 excess units in stock.There may be a known reason, such as a large customer order on its way.

If a review of current inventory and planned purchases shows that 400 units really are surplus, you can free up €14,000 by letting the level fall without reordering the same amount. There is no additional ongoing cost if the excess inventory is confirmed. At 400 units of monthly demand, reducing the inventory by 400 units corresponds to one month's consumption, although the actual timing depends on current stock and planned deliveries.

Safety stock was set when lead times varied more than they do today. A new calculation based on last year's demand and lead times gives 200 units. That frees up €3,500, provided the new data is representative. If it is not, you are just moving the risk onto your service level.

Cycle stock is the largest part of the inventory, and it is also the most expensive to change. The supplier will halve the minimum order to 1,200 units but raise the unit price by 2%, from €35.00 to €35.70. Average cycle stock falls from 1,200 to 600 units, and its value falls from €42,000 to €21,420. That frees up approx. €20,580.

In return, you pay 4,800 × €0.70 = €3,360 more for the goods each year, and you place four orders instead of two. Whether it pays off depends on what it costs you to hold the item.

Assume holding inventory costs 20% of its value per year (interest, space, handling, shrinkage and obsolescence), and that each order costs €70 to process:

  • Holding cost saved: 20% × €20,580 = approx. €4,100
  • Higher purchase price: €3,360
  • Two extra orders: €140

Net, you save around €600 a year and free up just over €20,000. Under these assumptions it pays off, but the saving is small. At a price increase of around 2.4%, the calculation breaks even. Use your own holding cost rate. It varies from company to company, and it is the number that tips the result.

Notice the order. The lever that frees up the most capital is the only one with an ongoing cost. The cheapest lever may free up less capital, but it can work faster if the excess inventory is actually there. And not every item has all three parts. This example was chosen because it shows them together.

How much can you realistically reduce inventory?

There is no inventory reduction percentage that fits every business. How much working capital you can free up depends on how much of your inventory sits in each part. If it is mostly cycle stock and well-calculated safety stock, there is little to gain without compromising service levels or paying higher purchase prices. If there is a lot of unexplained inventory, there is more.

Three things are worth keeping in mind when you set the target.

Inventory value and cash are not the same thing. Excess inventory improves cash flow when you use the existing stock instead of buying more. You avoid new payments while tied-up capital falls. Items with no movement are different. If you sell them for less than their book value, you recover less than what they are worth on paper. If you scrap them, inventory value falls but no cash comes in. You save space and future costs, and the write-down hits your profit.

The levers work at different speeds. Excess inventory disappears as it is consumed. New safety stock levels take effect as the next orders are placed on the new parameters. Smaller batches require a negotiation and a new agreement with the supplier.

Measure more than inventory value. Track it alongside days of supply and service level, so you can see whether inventory fell because you removed the right items or because you ran out. See the 7 inventory KPIs, and read about the balance between service level and inventory cost.

If you want to see what others have achieved, Hans Følsgaard brought inventory down from DKK 118 million to DKK 88 million, and Fritz Hansen freed up DKK 13.2 million by working with differentiated safety stock. These are results from specific companies, not a benchmark for your inventory.

Why does inventory creep back up?

A clean-up lowers inventory once. It does not change the decisions that built it up. If new items are still created without an inventory policy, new minimum orders are accepted without a calculation like the one above, and every item still has the same service level, inventory grows back.

So ask the four questions regularly, not only when finance calls. Which items hold inventory that cycle stock and safety stock cannot explain? Which safety stock levels are based on old data? Where does a large minimum order cost more in holding costs than the price advantage saves? And which items have not moved since the last review?

The questions are easy to ask for one item. The hard part is answering them for thousands of items at once and keeping the answers up to date as demand and lead times change.

Inact's inventory optimization shows which products tie up capital and prioritises them by importance and demand. From there, you can adjust safety stock, service levels and reordering to each item's role, so you free up working capital where inventory is not protecting anything.